Redarc 12v or 24v 150W Pure Sine Wave Inverter
- 12 Volt and 24 Volt models available
- True 240V AC pure sine wave reproduction
- Quiet, reliable, mobile and easy to use
- 2 Years Australian Warranty
- Input & output fully isolated design
- Advanced microprocessor controls
- C-Tick Approved
(You will be redirected to our secure online shop.)
All Prices in Australian Dollars.
From a 12VDC or 24V DC power source depending on model selected this 150W Pure Sine Wave Power Inverter will efficiently and reliably power a wide variety of 240VAC household appliances that draw less than 150 Watts of Power.
Redarc 150W Inverter Features:
- Pure sine wave output (THD < 3%)
- Output frequency： 50 / 60Hz switch selections
- Input & output fully isolated design
- Power Saving Mode to conserve energy
- High efficiency: 89~94%
- Driving highly inductive & capacitive loads at start moment
- Tri-Color indicators show input voltage & output load level
- Loading controlled cooling fan
- Advanced microprocessor controls
- Protection： Input low voltage Overload Short circuit
- Low battery alarm Input over voltage Over temperature
For information on finding a suitable inverter for your specific application please visit our inverter selection guide.
Redarc 150W Pure Sine Wave Inverter Specifications
| Model No. |
R-12-200S |
R-24-200S |
| Continuous Output Power |
150W |
| Surge Rating (Max.) |
200W |
| Input voltage |
12V |
24V |
| Output Voltage |
220 / 230 / 240V ± 3% |
Frequency
(Switch Selections) |
50 / 60Hz ± 0.05% |
| Output Waveform |
Pure Sine Wave (THD < 3%) |
| Efficiency (full load) Max.* |
87.0% |
88.0% |
| No Load Current Draw (Max.) |
0.22A |
0.16A
|
| Input Voltage Regulation |
10.5-15
VDC |
21.0-30
VDC |
| Input Level Indicator |
Red LED |
| Load Level Indicator |
| Failure Indicator |
| Protection |
Overload
Short Circuit
Reverse Polarity (Fuse)
Over / Under Input Voltage
Over Temperature |
| Remote Control Unit |
Yes (ON/OFF mode controlled by external switch) |
| Safety Cert. |
EN60950-1 |
| EMC |
EN55022: 1997
EN55024: 1997
EN61000-3-2: 1998
EN61000-3-3: 1995
e-mark
e13 022986 |
| Operating Temperature Range |
0 - 40°C |
| Storage Temperature Range |
-30°C to 70°C |
| Cooling |
Thermostatically controlled |
| Dimensions |
200(L)x132(W)x72(H)mm / 7.87(L)x5.20(W)x2.83(H) Inch |
| Weight |
2.7kg / 5.4 Lbs. |
* This test condition is normal DC input (13.5V) at 25°C
These specifications are subject to change without notice
For more information view the Redarc Power Inverter Product Guide PDF.  (1.84 MB)
|
